CFD Analysis in Francis Turbine Performance- A Review
Keywords:
CFD, Francis turbine, Hydro power plant, Cavitation, ANSYSAbstract
In any hydro power plant its turbine enacts a major role in deciding the competence as lot of phenomena depends on it if turbine works smoother then performance achieved by plant will be more and for that analysis of turbine becomes a need of the time and this need is fulfilled by the CFD it offers various software packages to analyse the part numerically at virtually no cost and in this study various parameters affecting different component of Francis turbine are analysed using CFD in addition to some validation of CFD results with actual one are also mentioned.
References
Navthar, R. R., TejasPrasad, J., Saurabh, D., Nitish, D., & Anand, A. (2012). CFD analysis of Francis turbine. International Journal of Engineering Science and Technology, 4(7), 3194-3199.
Tiwari, G., Kumar, J., Prasad, V., & Patel, V. K. (2020). Utility of CFD in the design and performance analysis of hydraulic turbines—A review. Energy Reports, 6, 2410-2429.
Zeng, Y., Liu, X., & Wang, H. (2012). Prediction and experimental verification of vortex flow in draft tube of Francis turbine based on CFD. Procedia Engineering, 31, 196-205.
Choi, H. J., Zullah, M. A., Roh, H. W., Ha, P. S., Oh, S. Y., & Lee, Y. H. (2013). CFD validation of performance improvement of a 500 kW Francis turbine. Renewable Energy, 54, 111-123.
Khanal, K., Neopane, H. P., Rai, S., Thapa, M., Bhatt, S., & Shrestha, R. (2016). A methodology for designing Francis runner blade to find minimum sediment erosion using CFD. Renewable Energy, 87, 307-316.
Teran, L. A., Larrahondo, F. J., & Rodríguez, S. A. (2016). Performance improvement of a 500-kW Francis turbine based on CFD. Renewable energy, 96, 977-992.
Gohil, P. P., & Saini, R. P. (2015). Numerical study of cavitation in Francis turbine of a small hydro power plant. Journal of Applied Fluid Mechanics, 9(1), 357-365.
Laín-Beatove, S., Ruiz, M. J. G., Quintero-Arboleda, B., & Orrego-Bustamante, S. (2010). CFD numerical simulations of francis turbines. Revista Facultad de Ingeniería Universidad de Antioquia, (51), 31-40.
Laín-Beatove, S., Ruiz, M. J. G., Quintero-Arboleda, B., & Orrego-Bustamante, S. (2010). CFD numerical simulations of francis turbines. Revista Facultad de Ingeniería Universidad de Antioquia, (51), 31-40.
Shukla, M. K., Jain, R., Prasad, V., & Shukla, S. N. (2011). CFD analysis of 3-D flow for francis turbine. MIT International Journal of Mechanical Engineering, 1(2), 93-100.
Akin, H., Aytac, Z., Ayancik, F., Ozkaya, E., Arioz, E., Celebioglu, K., & Aradag, S. (2013, May). A CFD aided hydraulic turbine design methodology applied to Francis turbines. In 4th International Conference on Power Engineering, Energy and Electrical Drives (pp. 694-699). IEEE.
Jain, S., Saini, R. P., & Kumar, A. (2010, October). CFD approach for prediction of efficiency of Francis turbine. In The 8th International Conference on Hydraulic Efϔiciency Measurement.
Semerci, D.S., & Yavuz, T. (2020, December 2020). CFD-Based Performance Analyses of a Francis Turbine in Several Guide Vane Positions. Conference ICAT.
Safi, W. H., & Prasad, V. (2017). Design and permance analysis of Francis turbine for hydro power station on Kunar river using CFD. International Journal of Advanced Research, 5(5), 1004-1012.
Ayancik, F., Celebioglu, K., & Aradag, S. (2014). Parametrical and theoretical design of a Francis turbine runner with the help of computational fluid dynamics. International Conference on Heat Transfer, Fluid Mechanics and Thermodynamics.
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2022 Akash Gupta
This work is licensed under a Creative Commons Attribution 4.0 International License.
Authors retain the copyright of their manuscripts, and all Open Access articles are disseminated under the terms of the Creative Commons Attribution License 4.0 (CC-BY), which licenses unrestricted use, distribution, and reproduction in any medium, provided that the original work is appropriately cited. The use of general descriptive names, trade names, trademarks, and so forth in this publication, even if not specifically identified, does not imply that these names are not protected by the relevant laws and regulations.